Bridco stainless steel Toggle Terminals – T Style are available in 4 sizes (see table below).
See our high quality grade 316 stainless steel toggle swage terminals (T style). These terminals must be properly swaged with a swaging machine. They are commonly used in balustrading, structural applications, membrane structures and general rigging.
See Terminals section in Bridco Catalogue (4 pages)
Find Toggle Terminal – T Style on page 37 of the Bridco Catalogue (PDF).
The following chart is a guide to terminal sizing.
All care possible is taken to ensure measurements are accurate at all times. However, slight size changes may occur from time to time, so please ask us to confirm particular sizes if your dimensions are critical.
| CODE | WIRE SIZE mm | DIA IMP in | A mm | D3 mm | L1 mm | L2 mm | L3 mm |
| SS-7805-04 | 4 | 5/32” | 10.7 | 8 | 78 | 45 | 11 |
| SS-7805-05 | 3/16” | 12.5 | 9 | 92 | 51 | 15 | |
| SS-7805-064 | 1/4” | 14.3 | 12 | 85 | 51 | 14 | |
| SS-7805-10 | 3/8” | 20.5 | 19 | 163 | 90 | 26.5 |
| Number of Sizes | 4 |
|---|---|
| Page number in Catalogue | 37 |
| Material | Grade 316 Stainless Steel |
