Powerful custom made swagers
Talurit has a wide range of powerful large swagers and press machines that are designed to handle wire ropes up to 6″ diameters. With optional equipment like rigging devices to form the eye and lifting yoke to change dies, one operator can manage the entire hydraulic swaging operation!
Our large press machines are equipped with a powerful two-stage hydraulic unit controlled by solenoid valves. Our large swagers are also:
- more compact and easy to work around than the competition. It also means that you will save money from having to reinforce your floor. Finally, it means that producing the casting is having up to 40% less environmental impact than our competitors.
- extremely easy to operate since the operator is able to use both hands when swaging. This is due to the electric foot pedal, that also has a “hold” position to e.g make tool setup quicker and more effective.
- able to pre-set the maximum swage load for our larger hydraulic press machines, and they have an adjustable start position. All these relatively small benefits are together making it a lot easier to operate the swager, saving both time and unnecessary movements for the operator.
- relatively low noise level emissions, despite the large size of these swagers, the noise level is no more than 74 dB (A).
When adding die holders even smaller dies can be used. To compensate the weight of a smaller lower die, the valve house can be adjusted to prevent the piston from drifting.
Talurit Group has developed a broad range of wire rope cutting machines over the years. These include basic hand cutters, manually operated hydraulic shears, fuse and tapering machines, and many different fully automatic cutting machines.
The automatic cutting machines are very efficient and proven to have short pay back time. The machines are manufactured with safety and environmental concerns in mind.
Our cutting machines are mainly intended for cutting preformed wire rope. The square cut is achieved by shears or disc cutting. We have a wide range of manual and automatic machines to choose from.
The ideal machine can be chosen depending on the amount of cutting required and the wire rope diameter range.